Hours of Operation: Monday - Friday: 8:00 AM - 7:00 PM - Saturday: 8:00 AM - 12:00 PM

 Picture

 Part #

 Description

Price

Mud Muncher motorized tear off quick release system. Includes: wiring, mounting hardware, film advance button, 3 spools of film, instructions and parts list.

Lens Width

12-1/2" (most common) $495.00 11-1/2" (ex. for Simpson Stringray helmet) $495.00 Not Sure (call me before shipping) $495.00

Motor Speed (RPM)

150 RPM 250 RPM Not Sure (call me before shipping)

NOT AVAILABLE AT THIS TIME
Mud Muncher motorized camera lens cleaning system, operates on 6 VDC input (camera not included) lens viewing size 1.8" x 2.2" wide

Includes: Camera Mud Muncher, Control unit 15 programmable settings and battery pack, Unwind battery pack with on/off switch, 3 spools of film, Instructions 

Film roll (2 ml thick) 2-1/8" wide x 50' long x 1.25" OD (equivalent to 75 tear offs) 

Order Quantity

1 to 4 Rolls/Price Each $6.50 5 to 10 Rolls/Price Each $6.25 11 or More/Price Each $5.75

Film guiding quick release lens (type #2) 12-1/2" long x 3" tall. Includes: inside, outside lexan pieces and Velcro mounting tape on guide only (12-1/2"for standard format shield) (11-1/2" for smaller format shield ex. Simpson Stingray)

Lens Size

12-1/2" Wide (standard, most common) $75.00 11-1/2" Wide (small format ex. Simpson Stingray) $75.00 Not Sure (call me before shipping) $75.00

Take up spool housing; made of billet aluminum 6061-T6 (top and bottom covers sold separately) 

Take up spool housing top cover; made of aluminum 6061-T6

Take up spool housing bottom cover; made of aluminum 6061-T6

Scraper for take up spool housing; made of lexan 

Motor mounting sleeve; made of aluminum 6061-T6

Motor mounting collet 

Film spindle; made of aluminum 6061-T6 

Film housing; made of billet aluminum 6061-T6 (cover sold separately) 

 Film housing cover; made of Lexan

Scraper for film housing; made of Lexan

M124 

Quick release pin; made of aluminum 6061-T6 

M125

Rubber wire strain relief 

Quick release cord 

3M 5/8" x 3 ft. dual lock clear low profile Velcro w/ adhesive back 

Spare parts kit: 2) scrapers, 6) 6-32 x 3/16" SS button head screws, 6) 6-32 x 1/4" SS button head screws, 4) 6-32 x 1/4" SS flat head screws, 1) 6-32 x 3/8" SS button head screws, 1) 6-32 x 3/8" SS set screw, 1) rubber grommet, 1) 1/16" allen wrench, 1) 5/64" allen wrench, 1) 3/32" allen wrench  

Velcro film advance button mounting strap 

3M 94 primer (.66ml ampule) used to prep plastic surfaces before appling adhesive tape or Velcro to increase bond strength 

3M 94 primer (1/2 pint) used to prep plastic surfaces before appling adhesive tape or Velcro to increase bond strength

Two sided 3M VHB tape 3/8" x 3 ft.

4-40 x 1/8" stainless steel button head: used to mount scraper and carbon fiber cover on (type #1) 
Use allen wrench size: 1/16" 

6-32 x 1/4" stainless steal button head: used for top & bottom covers
Use allen wrench size:5/64" 

6-32 x 3/8" stainless steel button head: used for motor collet
Use allen wrench size: 5/64" 

6-32 x 3/16" stainless steal button head: used to mount scraper and carbon fiber cover on (type #2)
Use allen wrench size: 5/64"

8-32 x 3/8" stainless steel button head: used to mount housing to shield
Use allen wrench size: 3/32" 

6-32 x 3/8" stainless steel set screw: used to mount film spindle to motor
Use allen wrench size: 1/16" 

8-32 x 1/4" stainless steel flat head: used to mount housing to shield
Use allen wrench size: 3/32"

 6-32 x 1/4" stainless steel flat head: used to mount housing to
shield
Use allen wrench size: 1/16"

E clip for quick release pin

Hairpin cotter pin for quick release

3/8" D-ring 

1/16" allen wrench 

5/64" allen wrench 

3/32" allen wrench 

Film advance button w/velcro mounting strap 

2 connector plug and wire; for car installation (48" long) 

150 or 250 RPM high torque gear reduction motor on steroids (standard 150 RPM motor)(optional 250 RPM fast action motor) 

Motor RPM

150 RPM Standard Motor $95.00 250 RPM Fast Action Motor $95.00 Not Sure (call me before shipping) $95.00

1/4" male plug w/two connector solder type terminals 

1/4" female plug w/two connector solder type terminals 

Fuse holder 

3 amp fuse 

NiMH battery pack: 12V 2200mAH (optional power source for Mud Muncher) 

Battery charger for 12V NiMH battery pack 

Weather pack 2 way male and female plug set w/terminals (20-18 ga) 

1/8" dia. x 1 ft. long shrink tubing with thick wall and modified polyimide adhesive which melts and flows, encapsulating and sealing components within 

1/4" dia. x 1 ft. long shrink tubing with thick wall and modified polyimide adhesive which melts and flows, encapsulating and sealing components within 

1/2"dia. x 1 ft. long shrink tubing with thick wall and modified polyimide adhesive which melts and flows, encapsulating and sealing components within 

3/4" dia. x 1 ft. long shrink tubing with thick wall and modified polyimide adhesive which melts and flows, encapsulating and sealing components within 

1/8" dia. x 1ft. long black single wall shrink tubing 

3/16" dia. x 1 ft. long black single wall shrink tubing 

1/4" dia. x 1 ft. long black single wall shrink tubing 

3/8" dia. x 1 ft. long black sincle wall shrink tubing 

1/2" dia. x 1 ft. long black single wall shrink tubing 

3/4" dia. x 1 ft. long black single wall shrink tubing 

1" dia. x 1 ft. long black single wall shrink tubing